Key takeaways
- RDC charges the same installed rates in Paradise Valley as across the Valley: large-format porcelain $12 to $22 per sq ft, engineered hardwood $8 to $16, natural stone $12 to $25.
- Old tile comes out only together with a new floor, at $3 to $5 per sq ft, and the removal takes 1 to 4 days.
- Paradise Valley incorporated on May 24, 1961, with the founding goal of one house per acre, and large lots leave room for large floor plans.
- Kitchens are surfaces only: countertops, backsplash and floors, with no cabinet work.
- Every installation carries a 1-year workmanship warranty, and RDC is fully insured.
What Makes Paradise Valley Floors a Different Job
Paradise Valley floors are a different job because the town was built around large lots. The Town of Paradise Valley's own history records that residents incorporated on May 24, 1961, after Phoenix and Scottsdale began looking to expand. They set three goals: one house per acre, an entirely residential town and little government regulation.
The town's Basic Town Facts list 15.4 square miles, 12,658 residents in the 2020 Census, and land that is predominantly zoned single-family, alongside 9 resorts (Town History; Basic Town Facts). Large lots leave room for large single-story plans. On a plan like that, one floor material can run from room to room with no transition strip, so any lippage or shade difference shows from across the room instead of across a hallway. How RDC plans a floor like that is set out on the flooring installation page.
12x24 tile carried through an open kitchen and living area in a Scottsdale home, with no transition strip between the rooms.
Arizona and Phoenix Conditions That Carry Into Paradise Valley
Paradise Valley shares the Valley's sun and hard water. City of Phoenix water measures 10 to 17.6 grains per gallon (City of Phoenix 2025 Water Quality Report), and RDC plans grout and stone sealing in Paradise Valley with hard water in mind. Across Phoenix the median home was built in 1985, the same median as Paradise Valley (U.S. Census ACS 2020-2024, B25035).
Paradise Valley sits between Phoenix and Scottsdale, and RDC serves it from the Bell Rd showroom in North Phoenix. Phoenix itself is covered on the flooring installation in Phoenix page and on the RDC home page.
To the east, the Scottsdale page covers that city. To the south and west, the Arcadia page covers flooring and bathroom work there. To the north, the Cave Creek page covers flooring and stone for Cave Creek homes.
The Neighborhoods RDC Serves in Paradise Valley
Paradise Valley's homes span several eras: the median home was built in 1985, and 49% were built between 1970 and 1999 (U.S. Census Bureau, American Community Survey 2020-2024, tables B25035 and B25034). New custom homes are still going up. An older home and a new build need different work, and the table below shows what RDC installs in each setting.
| Area | What RDC can install there |
|---|---|
| Clearwater Hills | Whole-home flooring, with any stair runs planned together with the floor |
| Mummy Mountain Park / Estates / Norte | Large-format porcelain, engineered oak, bathroom tile and showers |
| Camelback Mountain foothills | Floor replacement after the slab checks below; stone fireplace surrounds |
| Casa Blanca Estates | Continuous flooring room to room; kitchen countertops, backsplash and floors |
| New custom construction | Every surface supplied and installed, scheduled to the builder's sequence |
What an Older Paradise Valley Home Needs Before New Flooring
An older Paradise Valley home needs three checks before RDC Renovation & Design Concepts quotes a new floor: slab flatness, slab moisture, and what sits under the existing floor. Half the homes in town were built in 1985 or earlier (Census ACS), so a slab under one of them can be 40 years old or more. Each check can change the price.
- Slab flatness. Large-format tile and wide planks are unforgiving. A slab that was fine under small tile can telegraph every dip under a 48-inch plank. Grinding high spots and pouring self-leveling compound runs $1 to $4 per square foot at RDC, as its own estimate line.
- Moisture in the slab. Slab-on-grade concrete can hold moisture, and flooring manufacturers' warranties can exclude moisture damage. RDC moisture-tests to ASTM standards before anything is installed.
- What is under the existing floor. Older installations can sit over adhesives or underlayments that need testing and proper handling rather than a grinder. RDC does not remove asbestos: when a test comes back positive, a certified asbestos abatement contractor handles it first, and RDC then removes the remaining floor and installs the new one.
None of that is glamorous, and none of it appears in a finished photo. It is also the difference between a floor that still looks flat in ten years and one that does not. Each check is its own line on the estimate, as described under what flooring installation includes.
A hardwood hallway floor in a Scottsdale home, sanded, stained and refinished by RDC.
Recent Paradise Valley Projects
New Construction, Full Home Flooring
For a newly built Paradise Valley home, RDC supplied and installed all the flooring throughout the house, coordinating materials and layout across every room of a new custom build.
Bathroom Tile Throughout
Bathroom tile installed across the same home's bathrooms, with the layout set before the first cut and tight, even joints.
Natural Stone & Slab Surfaces
RDC supplied and installed the stone surfaces throughout the home, with the stone seams planned before anything was cut.
Outdoor Kitchen by the Pool
In a Paradise Valley backyard, an outdoor kitchen with a built-in BBQ and a countertop bar beside the pool, one of the outdoor projects RDC takes on alongside floors and stone.
The outdoor kitchen and bar RDC completed in a Paradise Valley backyard.
What We Do in Paradise Valley
Flooring
- Tile flooring, porcelain, ceramic & large-format
- Luxury vinyl plank (LVP) installation
- Laminate flooring installation
- Engineered & solid hardwood floors
- Carpet for bedrooms, stairs & bonus rooms
- Travertine & natural stone flooring
- Old tile and carpet removal with a new floor
- Subfloor prep, leveling & moisture testing
- New flooring after water damage (after a restoration company dries the subfloor)
Bathrooms
- Full bathroom remodeling
- Custom walk-in tile showers
- Tub-to-shower conversions
- Shower tile & waterproofing
- Vanity, sink & fixtures in a full remodel
Kitchen Surfaces
- Tile & stone backsplash
- Kitchen tile & LVP flooring
- Countertops (no cabinet work)
Countertops & Stone
- Quartz countertops
- Granite countertops
- Porcelain slab countertops
- Marble & quartzite countertops
- Stone & tile fireplace surrounds
- Outdoor kitchen & BBQ countertops
Home Remodeling in Paradise Valley
Home remodeling in Paradise Valley at RDC Renovation & Design Concepts is surfaces-led: floors, bathrooms, kitchen countertops and backsplash, stone, and outdoor kitchens, sold and installed on one contract with a 1-year workmanship warranty. RDC does no cabinet work and no additions. Walls move only when the project needs it, through the licensed subcontractors RDC works with.
- Floors through the whole house: one material, one order, one schedule. See what flooring installation includes.
- Bathrooms: full remodels and custom tile showers, with plumbing through licensed plumbing partners. See bathroom remodeling and spa-level primary baths.
- Kitchen surfaces: countertops, backsplash and floors while the cabinets stay. See kitchen surface remodeling.
- New custom homes: flooring and stone selected with the designer and set in the builder's sequence. See custom home flooring design.
The Materials Paradise Valley Estates Ask For
Estate-level projects here run on a shorter list of materials, chosen for how they read in big, light-filled rooms and how they hold up in the desert:
- Wide-plank engineered oak: real wood in the engineered construction that stays flatter on a slab in Arizona's dry air than a solid plank. See our engineered hardwood guide.
- Large-format porcelain, including 48x48 and larger: fewer grout lines across big open floor plans; it demands the flat-slab preparation RDC treats as standard scope. Details in our porcelain and ceramic tile guide.
- Marble, quartzite & natural stone: for floors, primary baths and countertops; RDC seals every natural stone floor and stone countertop at installation. Compare the options in our natural stone flooring guide.
- Slab surfaces: slabs are chosen in person at the Bell Road showroom, book-matched (vein-matched) slabs are available, and seam placement is planned before anything is cut.
Why Material Choice Is Different on a Large Lot
Two local conditions decide more here than taste does.
Sun exposure. A long, low house with walls of glass toward the mountains gets hours of direct sun across the floor. Porcelain is one option to compare for these sunny open plans, and the showroom has full-size pieces to see in real light. Engineered hardwood works too, but stain color and window treatment matter more in a room with a wall of west-facing glass than they would elsewhere.
Hard water. Valley water is hard, as covered in the Arizona and Phoenix section above. It leaves mineral deposits on grout and on unsealed stone, so RDC chooses the grout for each area, cement-based, sealed or epoxy, with the hard water in mind. For slab surfaces, non-porous quartz is easier to keep clean than a porous stone.
A marble-look porcelain shower with frameless glass in a Mesa home, built over a bonded waterproofing membrane.
How Large Lots Shape a Paradise Valley Floor
The Town describes itself as predominantly zoned single-family, and its founders set out to keep it entirely residential, with one house per acre. A large lot leaves room for a large single-story plan, and on a plan like that the main floor can run a very long way with no natural break.
That is a demanding condition for a floor. Repetition in a plank product can become visible over a long run. A deviation in the slab can telegraph through large-format tile.
And the material should be ordered from a single production run, because a second batch may not match across a plane that size. On a smaller home a batch difference is easy to miss; on a long open run it is easy to see.
Working Where There Is No Second Chance on Material
- One dye lot, ordered once, with overage. A shortfall on a run this large is not solved by buying another box. Calculating the overage correctly at order stage is part of the job, and it belongs in the written estimate.
- Slab flatness is the gate, not the tile. Large-format tile carries a flatness tolerance measured in eighths of an inch over ten feet. Across a long open plan the prep is the project, and a quote that leaves out floor prep on an older home has not accounted for the actual work.
- Deliveries depend on the lot. Long private drives and gated entries can limit what reaches the house and when. That is a scheduling reality worth stating at the start rather than discovering on delivery day.
- Privacy is part of the service. Small crews, clean sites, no signage unless it is invited.
Single-Room Work, Not Only Whole-Home Projects
RDC takes on whole-home projects, new construction and single rooms in Paradise Valley. Single rooms are welcome: a primary bathroom taken back to the studs, a stone fireplace surround in a living room, or a kitchen where the cabinetry stays and only the surfaces change.
That last one is a real cost decision. RDC does kitchen surfaces, not cabinetry. If your cabinets are solid and you want new countertops, a new backsplash and new flooring, that is a substantially smaller project than a full kitchen renovation. It is exactly the scope RDC handles.
A stacked-stone fireplace surround RDC installed in a Scottsdale living room.
Working Around a House You Still Live In
If you are living in the house during the work, the sequence changes, not the build. That means dust containment between the work area and the rest of the house and an order of rooms planned so the house stays livable. Access and working hours are agreed before the first day rather than negotiated on it. If you are away, every step is documented with progress photos.
For new construction, the constraint is different: the surfaces have to land in the builder's sequence, after mechanical and before the finish trades, and slipping that window pushes everything behind it. RDC schedules to the builder's plan, not to its own.
A curbless shower beside a freestanding tub, in a Scottsdale bathroom RDC remodeled.
Tile Installation in Paradise Valley
Tile installation in Paradise Valley is judged across long distances. At RDC, porcelain and ceramic tile runs $7 to $18 per square foot installed, and large-format tile (24x48 and larger) runs $12 to $22. Porcelain at 48x48 and larger suits open single-story plans, and at that size every tile behaves like a straightedge laid on the slab.
The layout is set from the longest sight line and the widest window, and the cuts are pushed into closets, pantries and thresholds where nobody stands and looks. The full quantity, overage included, is ordered from one production run so the shade holds from one end of the house to the other. Formats are compared on the tile installation in Phoenix page.
Preparation leads the schedule. Where the slab needs it, RDC grinds and levels the floor to ANSI A108.02. That standard allows no more than 1/8 inch of variation in 10 feet for tile with an edge of 15 inches or more. RDC also moisture tests the slab before anything is set.
Engineered Hardwood in Paradise Valley
Engineered hardwood is the real-wood floor RDC recommends for a slab-on-grade Paradise Valley home, wide-plank oak included. The NWFA's guidance (hardwoodinfo.com) is that engineered flooring is designed for on-grade installation, while solid hardwood glued to a slab is not recommended. The slab must also be level within 3/16 inch over 10 feet and dry.
Three things decide how it performs here. The slab comes first: in an older home it is moisture tested and flattened before a board goes down, because a wide plank shows every dip. Then the light: long walls of glass toward the mountains put hours of sun across the floor, so the stain is chosen for that exposure and window treatment is planned with it. Last, the boards acclimate in the house as the manufacturer specifies before installation starts.
Engineered hardwood runs $8 to $16 per square foot installed. More in the hardwood floor installers guide.
Tile Removal and Replacement in Paradise Valley
Stone or tile set on a thick mortar bed, found in some older custom homes, is heavier work to take out than builder tile. The mortar bed has to be broken out and hauled away. Only then can the slab underneath be ground flat and moisture tested. RDC removes old tile only as part of installing the new floor, so removal, haul-away, slab preparation and the new installation sit on one itemized estimate.
On an estate, what stays clean matters as much as what comes out. Dust walls, protected finished surfaces and a planned route for debris are set up before the first tile is lifted, particularly when the family is still living in the house. See how tile removal and replacement works.
How Much Does Tile Removal Cost in Paradise Valley?
Tile removal in Paradise Valley costs $3 to $5 per square foot at RDC Renovation & Design Concepts, and it is priced only together with the new floor. Where the slab needs it, grinding or leveling adds $1 to $4 per square foot. The removal itself takes 1 to 4 days before the new installation starts.
| Floor area | Tile removal ($3 to $5 per sq ft) | Leveling where needed ($1 to $4 per sq ft) |
|---|---|---|
| 1,000 sq ft | $3,000 to $5,000 | $1,000 to $4,000 |
| 2,000 sq ft | $6,000 to $10,000 | $2,000 to $8,000 |
| 3,000 sq ft | $9,000 to $15,000 | $3,000 to $12,000 |
The new floor is priced on top at its installed rate. A thick mortar-bed floor is priced after the measure, because the depth of the bed changes the labor. Final pricing is set individually for each customer after a free in-home measure.
The full process is on the tile removal and replacement page. Call or text (602) 788-1446 to book the measure.
Why Paradise Valley Builders & Homeowners Choose RDC
RDC has supplied and installed complete flooring, bathroom tile and stone surfaces for new construction in Paradise Valley, working alongside the builder and to the builder's sequence. The work is laid out for straight lines and tight joints, with the stone seams planned before anything is cut. RDC is fully insured, rated 5.0 on Google, and backs every installation with a 1-year workmanship warranty.
The RDC Client Experience
A large-lot project is long, and the family may be living in the house for all of it. The sequence below is the same on every Paradise Valley job, so at each point you know what happens next and who answers for it.
- Choosing in person. Selections are made at the Bell Road showroom with full-size pieces laid next to each other, which matters when one material will cover thousands of square feet.
- Measuring the house. A visit to the home to take dimensions and look at what drives cost on an estate: how flat the slab is, whether it holds moisture, and what the current floor is bonded to.
- A proposal in writing. Material, demolition, slab preparation, fabrication and labor are itemized in one proposal before any work is booked.
- A schedule agreed in advance. The working schedule is set before work starts and planned around the household, or on a new build around the builder's sequence.
- One name to call. A single RDC contact carries the project from proposal to handover.
- Progress you can see. Progress photos and updates are standard, so the whole job is documented and visible to you from start to finish.
- Handover with a punch list. The finished rooms are inspected together, and every open item is written down and closed before the project is signed off.
- Workmanship covered for a year. A written 1-year workmanship warranty sits alongside the manufacturers' own material warranties.
On site, every day
- The work zone is sealed off from the lived-in rooms to keep dust contained.
- Each evening the site is swept and left orderly, not only on the final day.
- The order of rooms is planned so the house stays livable.
- Gate access and working hours are settled before work begins.
- No change in scope goes ahead until its price is approved in writing.
Designers, Realtors and contractors. Interior designers, Realtors and contractors refer work to RDC from Phoenix and Scottsdale. RDC installs to the designer's specification, gives the trade one contact, and schedules around the other trades. For a trade walkthrough, call or text (602) 788-1446.
How Much Does It Cost to Replace Flooring in a Paradise Valley Home?
Replacing flooring in a Paradise Valley home is priced at the same installed rates RDC Renovation & Design Concepts charges across the Valley; the size of the floor moves the total. For 3,000 sq ft, large-format porcelain is 3,000 × $12 to $22 = $36,000 to $66,000, and engineered oak is 3,000 × $8 to $16 = $24,000 to $48,000.
Tile formats and prices are compared on the porcelain tile installation page, and engineered wood on the hardwood installers page.
| Surface | Typical installed price at RDC |
|---|---|
| Porcelain or ceramic tile | $7 to $18 per sq ft |
| Large-format porcelain (24x48 and larger) | $12 to $22 per sq ft |
| Natural stone and travertine | $12 to $25 per sq ft |
| Wide-plank engineered hardwood | $8 to $16 per sq ft |
| Luxury vinyl plank | $4 to $9 per sq ft |
| Carpet for bedrooms, including pad | $3 to $7 per sq ft |
| LVP on stairs, including carpet removal and stair nose | $100 to $185 per step |
| Quartz countertops | $50 to $120 per sq ft |
| Granite countertops | $45 to $100 per sq ft |
| Porcelain slab countertops | $60 to $130 per sq ft |
| Marble countertops | $80 to $180 per sq ft |
| Quartzite countertops | $100 to $200 per sq ft |
Please note: these ranges are a guide, not a quote, and they can change. Final pricing is set individually for each customer after a measure, from the material chosen, the slab's flatness and condition, the layout, and the amount of demolition and preparation. On a large home the square footage alone moves the total a long way, so the written estimate is the only reliable figure.
Come See the Materials First
Everything starts at our showroom at 1610 E Bell Rd Suite 101, Phoenix, which serves Paradise Valley and is open Sunday to Friday, 10 AM to 5 PM (closed Saturday). Compare full-size samples side by side in real light instead of choosing from a photograph. From there we visit the house, measure, and put a written itemized estimate in front of you covering material, removal, prep and installation together.
RDC is fully insured, the installation is performed by the licensed installers RDC works with on every job, and every project carries a 1-year workmanship warranty. You deal with RDC throughout, from the estimate to the final walkthrough.
You can also see what sets a luxury bathroom apart in Paradise Valley, browse the project gallery or read about the Bell Road showroom. You can also compare the luxury brands we carry, or look at custom walk-in showers and countertop options.