Local data report · Free to cite with a link
Phoenix Flooring Cost Report 2026
The Phoenix Flooring Cost Report 2026 lists the installed prices RDC Renovation & Design Concepts publishes for each floor it sells and installs in Phoenix. At RDC, installed floors run $3 to $25 per square foot, material and labor together. Removing an old floor adds $3 to $5 per square foot, and slab leveling $1 to $4 where needed.
Key Findings
- At RDC, carpet with pad is the lowest installed price, $3 to $7 per square foot, and natural stone the highest, $12 to $25.
- LVP installs for $4 to $9 per square foot at RDC, while porcelain tile runs $9 to $18.
- Large-format tile, meaning pieces 24x48 inches and larger, runs $12 to $22 per square foot and needs a flatter slab than standard tile.
- Taking out the old floor costs $3 to $5 per square foot at RDC, whether it is carpet, LVP, laminate, tile or Saltillo.
- By the arithmetic in Table 2, LVP through 1,500 square feet comes to $6,000 to $13,500 installed, before removal.
Table 1. Installed Flooring Prices per Square Foot at RDC
| Floor or line item | Installed price per sq ft | Where it fits | Published on |
|---|---|---|---|
| Carpet (with pad) | $3 to $7 | Bedrooms and media rooms | Carpet installation in Phoenix |
| Luxury vinyl plank (LVP) | $4 to $9 | Whole-home floors; waterproof, with an expansion gap planned at the walls | LVP cost guide |
| Laminate | $4 to $8 | Wood-look floors on a tighter budget | Laminate flooring |
| Ceramic tile | $7 to $14 | Floors and walls at a lower cost than porcelain | Tile quote guide |
| Engineered hardwood | $8 to $16 | Living and dining areas; real wood over concrete | Engineered hardwood |
| Porcelain tile | $9 to $18 | High-traffic floors; dense and low-porosity | Tile quote guide |
| Solid hardwood | $10 to $20 | Rooms where solid wood is the priority | Flooring showroom |
| Large-format tile (24x48 in. and up) | $12 to $22 | Open layouts with fewer grout lines; needs a flatter slab | Tile quote guide |
| Natural stone | $12 to $25 | Entries and feature areas; travertine stays cooler underfoot | Travertine and stone |
| Removal of the old floor | add $3 to $5 | Any old flooring: carpet, LVP, laminate, tile or Saltillo | LVP cost guide |
| Slab prep and leveling | add $1 to $4 | Only where the slab is out of flat | Slab prep guide |
Please note: these are typical ranges and can vary. The room, the slab prep, the transitions and the trim all move the number. Final pricing is set individually for each customer after an on-site measure, in a free written estimate.
The floor ranges from Table 1, drawn on a $0 to $25 per sq ft scale.
Table 2. Whole-House Math for 1,000, 1,500 and 2,000 Sq Ft
Table 2 is arithmetic, not a quote. Each cell multiplies the floor area by the low and the high end of RDC's published price per square foot. Slab leveling, baseboards and transitions are left out, because they depend on the house.
| Floor area | Carpet ($3 to $7) | LVP ($4 to $9) | Engineered hardwood ($8 to $16) | Porcelain tile ($9 to $18) | Removal ($3 to $5) |
|---|---|---|---|---|---|
| 1,000 sq ft | $3,000 to $7,000 | $4,000 to $9,000 | $8,000 to $16,000 | $9,000 to $18,000 | add $3,000 to $5,000 |
| 1,500 sq ft | $4,500 to $10,500 | $6,000 to $13,500 | $12,000 to $24,000 | $13,500 to $27,000 | add $4,500 to $7,500 |
| 2,000 sq ft | $6,000 to $14,000 | $8,000 to $18,000 | $16,000 to $32,000 | $18,000 to $36,000 | add $6,000 to $10,000 |
Final pricing is set individually for each customer based on their specific project. RDC measures every room before it writes the estimate; call or text (602) 788-1446.
In this report: Table 1 · Table 2 · What changes the number · Methodology and sources · How to cite
Flooring Installation Cost per Square Foot in Phoenix
RDC Renovation & Design Concepts is a flooring, bathroom and countertop remodeling company in Phoenix, Arizona. It sells and installs every floor in Table 1 from its Bell Road showroom. Those are the installed ranges RDC works within across the Phoenix Valley. Each price covers the material and the labor, so you can compare any bid line for line.
Where a floor lands inside its range depends on the product. On LVP it is the wear layer and the core, on laminate the plank thickness, on hardwood the species and plank width. Tile moves with its size and the slab prep it needs. At the showroom, two tiers side by side make the difference easy to see.
Engineered hardwood through an open kitchen and living area in a Glendale home.
Whole-House Flooring Cost in Phoenix
Here is the same price list multiplied out for three home sizes, for a whole ground floor or a whole house in one continuous surface.
| Home size | LVP ($4 to $9) | Engineered hardwood ($8 to $16) | Porcelain tile ($9 to $18) |
|---|---|---|---|
| 1,200 sq ft | $4,800 to $10,800 | $9,600 to $19,200 | $10,800 to $21,600 |
| 1,800 sq ft | $7,200 to $16,200 | $14,400 to $28,800 | $16,200 to $32,400 |
| 2,500 sq ft | $10,000 to $22,500 | $20,000 to $40,000 | $22,500 to $45,000 |
Mixing materials changes the total. With hard flooring through the living areas and carpet in the bedrooms, an 1,800 sq ft home needs about 1,300 sq ft of LVP. At RDC's rates that is $5,200 to $11,700, plus $1,500 to $3,500 for 500 sq ft of carpet. Together that is roughly $6,700 to $15,200 before removal and prep.
See the materials side by side at the Bell Road flooring showroom before you decide. The price gap between two LVP collections is easier to judge in person than on a screen.
One continuous LVP floor through the living and dining areas.
How Much Does It Cost to Replace Flooring in a House in Arizona?
At RDC, replacing flooring in an Arizona house costs the installed price of the new floor, $3 to $25 per square foot by material. Taking out the old one adds about $3 to $5 per square foot. At RDC, an LVP house lands at about $7 to $14 per square foot all in, before leveling.
Replacement costs more than flooring a new build because something is already bonded to the slab. Carpet and pad come up in hours. Original ceramic tile takes the most labor because the thinset under it has to be ground flat before a new floor can go down.
With the slab bare, it is moisture-tested following ASTM guidelines. Where it is out of flat, it is leveled at about $1 to $4 per square foot. If you want to choose the material first, start with a visit to the Bell Road showroom in North Phoenix. RDC then measures the house and writes the removal, the prep and the new floor as separate lines.
After RDC took out the old tile: the bare slab, cleaned and ready for leveling before the new LVP.
How Much to Replace Flooring in a 1,500 Sq Ft House?
At RDC, new flooring for a 1,500 sq ft house costs about $6,000 to $13,500 installed in LVP. Engineered hardwood runs $12,000 to $24,000 and porcelain tile $13,500 to $27,000. Removing the old floor adds roughly $4,500 to $7,500. Each figure is the per-square-foot range from the table above multiplied by 1,500.
| Floor | Per sq ft | 1,500 sq ft installed | With removal ($3 to $5) |
|---|---|---|---|
| Carpet (with pad) | $3 to $7 | $4,500 to $10,500 | $9,000 to $18,000 |
| Luxury vinyl plank | $4 to $9 | $6,000 to $13,500 | $10,500 to $21,000 |
| Engineered hardwood | $8 to $16 | $12,000 to $24,000 | $16,500 to $31,500 |
| Porcelain tile | $9 to $18 | $13,500 to $27,000 | $18,000 to $34,500 |
Mixing floors brings the total down. Take 1,100 sq ft of LVP through the living areas ($4,400 to $9,900) and 400 sq ft of carpet in the bedrooms ($1,200 to $2,800). The same house then comes to $5,600 to $12,700 before removal. The LVP-only math for 1,000, 1,500 and 2,000 sq ft, by plank tier, is on the page how much does LVP flooring cost in Arizona.
Add-Ons That Change a Phoenix Flooring Quote
The per-square-foot price is only half of a flooring estimate. These lines explain most of the difference between two bids on the same house.
- Removal and disposal of the old floor: add about $3 to $5 per sq ft. Carpet comes up quickly. Glued-down tile and thick thinset take the longest, and that labor belongs on its own line.
- Slab prep and self-leveling: add about $1 to $4 per sq ft, when needed. The Phoenix floors RDC installs usually go over a concrete slab, and a slab that is out of flat shows through the new floor. The slab moisture testing and leveling guide explains how RDC decides.
- Pattern: add roughly 10 to 20 percent to the tile labor. Diagonal and herringbone layouts need more cuts than a straight lay.
- Baseboards and transitions. These are quoted as separate lines, because they vary more by house than by material. On LVP stairs, RDC's price of $100 to $185 per step already includes carpet removal, installation and the stair nose.
Why Two Phoenix Flooring Quotes Differ by Thousands
Two bids on the same 1,800 sq ft differ, in RDC's experience, because one of them leaves something out, not because of the material.
The lines to look for in any bid are the moisture test, the leveling, the removal of the old floor, and the baseboards. A low bid that omits them becomes a change order once the old floor is up. An itemized estimate shows every one of them before work starts.
The guide to choosing a flooring contractor in Phoenix lists the questions that expose a missing line in any bid, including ours.
Tile Removal Before a New Floor
If your house still has its original ceramic, it comes out first. RDC removes old tile only as part of installing the new floor, never as a standalone demolition job. The removal, the haul-away and the slab grinding appear as their own lines on the same estimate. The full process is on the tile removal and replacement page.
What Does Flooring Replacement Cost in Phoenix?
At RDC, flooring replacement in Phoenix costs the same $3 to $25 per square foot installed as anywhere else in the Valley. Removing the old floor adds about $3 to $5, and leveling $1 to $4 where the slab needs it. What the house holds decides which of those lines appear on the estimate.
Age is the first clue. The median Phoenix home was built in 1985, and 49% of the city's housing dates from 1970 to 1999. By decade, 19% dates from the 1970s, 17% from the 1980s and 13% from the 1990s (U.S. Census Bureau, American Community Survey 2020-2024 five-year estimates).
A replacement in a house of that age starts with an old floor to take out, so removal belongs on the estimate from the start. The bare slab is checked for moisture and flatness before the price is final. In North Phoenix, the flooring showroom at 1610 E Bell Rd, Suite 101 has tile, LVP and carpet side by side. The free in-home measure is booked from there.
Flooring Costs Across the Valley
The ranges above apply across the Phoenix Valley. What changes from city to city is the house and the slab under it, not the price list.
A home's age is a good first clue to what sits under the old floor. By Census estimates, the median home was built in 1985 in Paradise Valley, 1989 in Mesa, 1991 in Scottsdale and 1999 in Peoria. Source: U.S. Census Bureau, American Community Survey 2020-2024 five-year estimates.
- Scottsdale. A slab from the 1970s or 1980s may need grinding before large-format tile. See flooring installation in Scottsdale.
- Paradise Valley. Old travertine, Saltillo or marble on a mortar bed puts removal ($3 to $5 per sq ft) and slab prep on the first estimate. See Paradise Valley flooring.
- Mesa. 61% of Mesa homes date from 1970 to 1999, so an older slab may need leveling before tile or glue-down plank. See flooring in Mesa.
- Peoria. The newest housing of the four; the slab still gets the moisture test before any floor goes down. See flooring in Peoria.
- Sun City and Sun City West. When a whole house goes from carpet to a hard floor, the carpet and pad come up quickly. Removal appears on the estimate as its own line. See Sun City flooring and Sun City West flooring.
Arcadia, Cave Creek and Carefree, Fountain Hills, Anthem, Glendale, Chandler and Gilbert use the same price list; each city page covers its own housing.
What Changes Flooring Costs in the Phoenix Valley?
In the Phoenix Valley, three local conditions move a flooring number: hard water, heat and sun, and the concrete slab under the floor. RDC's price per square foot stays the same across the Valley. These three decide the grout, the plank tier, and whether leveling at $1 to $4 per square foot is needed.
Hard Water and Tile Grout
Phoenix tap water is hard. The City of Phoenix Water Services Department's 2025 water quality data puts total hardness at 10 to 17.6 grains per gallon. Those minerals leave a film on cement grout over time. RDC chooses the grout for each area, cement-based, sealed or epoxy, with the hard water in mind.
Heat, Sun and the Expansion Gap
Heat changes the plan more than the price. For its SolidTech plank, Mohawk's installation instructions specify a 1/4 inch gap at the walls, and 5/8 inch where temperatures run above 85°F. Shaw's Floorte guidelines note that strong direct sun can expand the plank and fade it. They suggest blinds or drapes at peak hours.
The gap hides under baseboard or quarter round, so it adds no line to the estimate. For the sunniest rooms, the premium rigid-core tier of LVP fits best, together with window coverings. At RDC that tier runs $6 to $9 per square foot installed.
The Concrete Slab Under the Floor
The Phoenix floors RDC installs usually sit on a concrete slab, and the slab sets the prep line on the estimate. ASTM F710 says a slab should be moisture-tested no matter how old it is. RDC tests every slab before a new floor goes in.
Tile is stricter about flatness. Once any edge of the tile reaches 15 inches, ANSI A108.02 limits the slab to 1/8 inch of variation over 10 feet. Where the slab is out of flat, grinding and self-leveling add about $1 to $4 per square foot. The slab prep and moisture testing guide shows how RDC checks it.
How Long Does It Take to Install Flooring?
Most RDC flooring installations are completed in 1 to 3 days, depending on the square footage and the material. An LVP or laminate room can often be finished in a single day once the slab is prepped. A single carpeted room takes a few hours. A whole house in LVP usually takes a few days.
Two steps come before the new floor and add to the calendar. Old tile has to be broken out and the thinset ground off the slab. Any area that is out of flat then has to be leveled.
Tile is the slowest floor to install, because every piece is set in mortar and then grouted. Click-lock LVP goes down with no setting time at all. Whole-house carpet usually takes a day or two, depending on the square footage and how much furniture has to be moved. If you will live in the house during the work, ask at the estimate which rooms will be out of use and for how long.
How Long Does Flooring Need to Acclimate?
It depends on the floor. Some rigid-core LVP needs no acclimation at all, while other vinyl lines ask for 48 hours in the room at 55 to 85°F. Wood is ready when its moisture content matches the house, not after a set number of days. In a Phoenix home, every version starts with the air conditioning running.
The rule comes from the product, so RDC follows the installation sheet for the exact floor you pick. Mohawk's SolidTech LVP must sit in the room for at least 48 hours at 55 to 85°F. That range has to hold during the install and for 24 hours after it. Mohawk's SolidTech R line, by contrast, needs no acclimation.
Shaw's Floorte plank also skips acclimation but has to go down in a climate-controlled space. For engineered hardwood, the NWFA installation guidelines judge acclimation by moisture reading, not by the calendar. They also ask for heating and cooling to run at least five days before the wood is delivered. A vacant house with the thermostat off in July meets none of these, so the schedule starts with the AC on.
Should Flooring Go In Before or After Doors, Drywall and Paint?
After. Flooring is one of the last trades in a remodel: drywall, texture and paint are finished and dry first. Doorjambs are undercut so the new floor slides beneath them, and baseboard or quarter round goes on at the end to cover the expansion gap. That order keeps joint compound, paint and ladders off the new floor.
The standards agree. Before a wood floor is installed, the NWFA asks for all wet work to be complete and thoroughly dry. That includes drywall taping, texturing, painting and tile.
Shaw tells installers to lay its plank only after every trade that could damage it is done, and to undercut the doorjambs first. Mohawk's rigid-core instructions say installation should not begin until the other trades have finished, and note that quarter round or baseboard covers the expansion space. If new paint is part of the plan, raise it at the estimate so the painter and the flooring are scheduled in the right order.
Paying for a Whole-House Floor
A whole-house floor is a real number, and it does not have to be paid in one go. RDC offers financing, so the project can be paid over time. The estimate is written the same way either way, with every line itemized.
Methodology and Sources
Every price in the Phoenix Flooring Cost Report 2026 is RDC Renovation & Design Concepts' own published installed price, not a survey of other companies. Each range covers the material and its installation together, the way RDC's free written estimates price a floor. The ranges were last reviewed on October 5, 2026.
- What a range includes. The flooring material and the labor to install it. Moving furniture and appliances is part of the job.
- What a range leaves out. Removal of the old floor ($3 to $5 per sq ft) and slab leveling ($1 to $4 per sq ft) are separate lines. RDC estimates list them that way too. Baseboards and transitions are quoted separately too.
- What a range is not. It is not a quote and not a market average. The final price follows an on-site measure of the real rooms and slab.
- How Table 2 was built. Square feet multiplied by the low and the high end of each published range, with no other adjustment.
External sources used in this report:
- City of Phoenix Water Services Department, 2025 water quality data: total hardness of 10 to 17.6 grains per gallon.
- Mohawk, SolidTech installation instructions: expansion space and acclimation.
- Shaw, Floorte installation guidelines: direct sun, thermal expansion and fading.
- ASTM International, ASTM F710: preparing concrete floors for resilient flooring, including moisture testing.
- ANSI A108.02: the flatness tolerance for tile with an edge of 15 inches or longer.
- National Wood Flooring Association, NWFA Installation Guidelines: wood acclimation and job-site conditions.
- U.S. Census Bureau, American Community Survey 2020-2024 five-year estimates, tables B25034 and B25035: year built and median year built.
How to Cite the Phoenix Flooring Cost Report 2026
Journalists, Realtors, HOA newsletters and bloggers may quote any figure in this report with a link to this page. Please keep the source and the review date with the number. Suggested citation:
RDC Renovation & Design Concepts, “Phoenix Flooring Cost Report 2026,” https://rdcflooring.com/flooring-installation-cost-phoenix.html, reviewed October 5, 2026.
Copy-ready HTML link for a blog or newsletter:
<a href="https://rdcflooring.com/flooring-installation-cost-phoenix.html">Phoenix Flooring Cost Report 2026 (RDC Renovation & Design Concepts)</a>For comment on Phoenix flooring prices, journalists can call or text RDC at (602) 788-1446 or email info@rdcflooring.com.
Where to Start
Start at the Bell Road showroom in North Phoenix and narrow the choice to two or three floors. RDC then measures at your home and writes the estimate from the real square footage. Both steps are free, with no obligation.
The showroom is at 1610 E Bell Rd, Suite 101, open Sunday to Friday 10am to 5pm, closed Saturday. Request a free estimate, or call or text (602) 788-1446.
The Bell Road showroom, where the free in-home measure is booked.
Material guides: LVP flooring, tile installation in Phoenix, engineered hardwood, carpet, and flooring installation in Phoenix.